Hi ,
I was trying to enable BFD on tunnel interfaces on WS-C6509-V-E but no luck ,
interface TunnelXX |
|
ip address x.x.x.x 255.255.255.252 |
ip mtu 1400 |
ip tcp adjust-mss 1360 |
tunnel source 10.x.x.x |
tunnel destination 10.x.x.x |
ip access-group 1 in |
keepalive 3 10 |
bfd interval 200 min_rx 200 multiplier 5 |
! |
Current version : Version 12.2(17r)SX7
Any suggestions or comments ?
Thanks.