12-20-2005 05:10 AM - edited 03-03-2019 11:16 AM
Hi,
I'm getting the following error in the 1841 Router. The error is "Dec 20 10:34:56.983: ASSERTION FAILED: file "../chips/gt96k/gt96k_timer.c", lin
e 771". The Router is running following IOS .
Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.3(11)T5, R
ELEASE SOFTWARE (fc1)
What could be the problem ?.
Thanx
Raju
12-20-2005 05:58 AM
Raju
I believe that the errors that start with ASSERTION FAILED are software problems. You might try putting the error message and the output of show version into the output interpreter and see if it points to anything. Or this would be appropriate to open a case with Cisco TAC.
HTH
Rick
12-20-2005 06:31 AM
Hello Raju,
there is an IOS bug that might apply to you:
Symptoms
A router may show following error message:
ASSERTION FAILED: file "../chips/gt96k/gt96k_timer.c"
Conditions
The error message is shown when "isdn leased line bri x/y"
is configured on a wic-1bri-s/t card located on wic slot0.
Workaround
Move the card to a slot other than slot0.
Can you verify the above ?
Regards,
GP
12-20-2005 07:25 AM
Thanks GP .WIC-1bri-s/t card is already located in Slot1 only.
Regards,
Raju
12-20-2005 08:04 AM
Hello Raju,
for the sake of trying, can you put the card in Slot 0 ? Do you have the command specified in the bug configured ?
Regards,
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide