hi,
my cisco 3640 router went in ROMMON prompt, so i tried upgrading the IOS via xmodem recovery, while it was copying on in the middle i get the error.
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c3640-i-mz.122-1.bin ...
Erasing flash at 0x307c0000
program flash location 0x30200000
amd_flash_cmd: timeout on AMD flash command
program_flash: location 0x30200004 wrote 0x8beece50,contains 0x24eece50
program flash failure at location 0x30200004 - aborting
rommon 4 > dev
Devices in device table:
id name
flash: flash
does it mean that flash has gone bad?
