03-29-2009 06:31 PM - edited 03-04-2019 04:08 AM
Hi,
I am having some issues with a hwic-1adsl card.
My two issues are that I cant firgure out how I find out the version of firmware and my second issue is because of this I am not sure what version of IOS will be stable with it.
I have had 12.14-15T running on it and it froze the interface eventually after 4 - 5 hours. I have now downgraded to 12.4-6(11)T to see if this will fix the issue.
My major question is around how do I find out what the firmware version of the HWIC is though.
Then once thats known if I need to upgrade.
Cheers,
John
03-29-2009 08:09 PM
HWIC-1ADSL and HWIC-1ADSLI were first supported in 12.4(4)T.
03-29-2009 08:12 PM
Yeah I realise it was supported from 12.4(4)T. The problem is that I am not sure what firmware version the card is.
I would like to find out so I know the IOS I am about to use will work properly with it.
03-29-2009 08:48 PM
show dsl interface atm
To display information specific to the asymmetric digital subscriber line (ADSL) for a specified ATM interface, use the show dsl interface atm command in EXEC mode.
show dsl interface atm number
I hope this helps
Syntax Description
number
ATM interface number.
03-29-2009 09:06 PM
Thank you very much that is exactly what i needed!
08-04-2010 09:19 AM
.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide