cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1330
Views
0
Helpful
5
Replies

Getting alerts for ATM interface

rakesh.dutt
Level 1
Level 1

HI,

i am getting below alerts on my router:

Mar 21 07:33:48.057 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 21 07:33:49.057 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 21 09:28:07.473 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 21 09:28:08.473 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 11:33:10.116 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 11:33:11.116 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 13:19:08.493 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 13:19:09.493 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 17:58:58.489 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 17:58:59.489 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 19:43:13.880 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 22 19:43:14.880 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure
Mar 23 01:02:21.066 GMT: %ENTITY_ALARM-6-INFO: ASSERT MAJOR AT1/0 Far End Receiver Data Failure
Mar 23 01:02:22.067 GMT: %ENTITY_ALARM-6-INFO: CLEAR MAJOR AT1/0 Far End Receiver Data Failure

I am not able to find any relevant information for the same.

Regards,

Rakesh

5 Replies 5

Do you have any tracebacks generated on router. Please post,

sh ver

sh log

sh inv

Regards,

Jyoti

Hi Jyothi,

I have attached the show logs as well as show tech.

We have not observed any tracebacks for this.

Moreover i would like to mention that there is no data disruption. I feel that they are fake alarms & could be an IOS bug.

Regards,

Rakesh

Hello guys, I've the same problem here with the same message. After five years, we still have Cisco 7200! OMG..

Sep 15 07:00:50: %ENTITY_ALARM-6-INFO: CLEAR CRITICAL AT2/0 Path Far End Receiver Data Failure
Sep 15 07:00:54: %ENTITY_ALARM-6-INFO: ASSERT CRITICAL AT2/0 Path Far End Receiver Data Failure
Sep 15 07:00:55: %ENTITY_ALARM-6-INFO: CLEAR CRITICAL AT2/0 Path Far End Receiver Data Failure
Sep 15 07:01:01: %ENTITY_ALARM-6-INFO: ASSERT CRITICAL AT2/0 Path Far End Receiver Data Failure

Hello Rakesh,

I don't see any recent bug for same with this IOS version ,  12.4(4)XD9...

There are few bugs filed for same issue however that's being fixed in IOS version XD9.

I am assuming it could be problem with OIR of card.

Just do a soft or hard reset on card, and errors will stop.

Please rate the post ,if it helps.

Regards,

Jyoti

Hi Jyoti,

OIR has already been tried. As well as chassis has also been tried to be rebooted but with no success.

Regards,

Rakesh

Review Cisco Networking for a $25 gift card