getting snmp alerts for interface up and down

[sivakondalarao]

Hi,

I wanted to monitor interface status through SNMP.

We have SNMPc server, that will send mail alerts whenever device is down.

In the same way I wanted to get traps for interface up down.

So what configuration required in router to generate traps for link status.

Regards

SKRAO

[jackyoung]

Please refer to below link :

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml

By using "snmp-server enable traps snmp linkup" & ""snmp-server enable traps snmp linkdown".

Hope this helps.

[abhishek_nandavat]

Hi,

For what device do you want to enable those snmp traps?

In addition you may also need to add the following command -

"snmp-server trap link switchover"

Hope this helps!

Regards,

AbhisheK

Please rate all posts!!!