I have a Cisco SOHO 97.
Here is my scenario:
LAN Network is: 10.0.0.0/24
Default route: 0.0.0.0
I need help to configure the DIALER1 port to connect to my provider:
To connect to my provider the username is: cotel
The password is: cotel.
I want the LAN users can be able to surf on the internet. (As normally)
Please try PPPoE configuratoin:
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
ip address negotiated or IP address x.x.x.x x.x.x.x
ip nat outside
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxx
ppp chap password xxxxxxx
ppp pap sent-username xxxxxxx password xxxxxxx
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit x.x.x.x y.y.y.y(wildcard mask)
ip route 0.0.0.0 0.0.0.0 Dialer0
I configured my router as you described.
I can ping the router from my LAN but it doesn't have internet. (I can't ping 188.8.131.52)
Now i tried to access the router via telnet but the router says:
Password required, but none set
How can I fix it? And... maybe you forget somes details because the configuration doesn't work.
to configure telnet, yuou need ot configure the line vty
line vty 0 4
make sure you have enable password configured as well.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: