cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
0
Helpful
1
Replies

Help with Cisco 1841 unable to access IMAP and server

admiralmedia
Level 1
Level 1

I have an 1841 Cisco Router, WAN is taking link from PPPoE provider with the help of Dialer 0 interface, also enabled NAT.

1. The issue is that from an PC on the LAN I am able to access from Thunderbird POP mail account(port 110) but I get "could not connect to mail server" when trying IMAP(port 143), both ports are set with rules on the web server on LAN 192.168.0.10:

ip nat inside source static tcp 192.168.0.10 110 interface Dialer 0 110

ip nat inside source static tcp 192.168.0.10 143 interface Dialer 0 143

 

2. Another issue is regarding the access of domains hosted on the web server 192.168.0.10 from an PC on the same LAN. From external I can access just fine the domains but from LAN I can't.

Attached is the sh run, masked external IP's and passwords

1 Reply 1

admiralmedia
Level 1
Level 1

Solved my issue starting with no 2

I've added beside my current config the bellow line, which also solved my first issue.

ip nat inside source static 192.168.0.10 interface Dialer0

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco