cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
692
Views
0
Helpful
7
Replies

how can I force the router to run no shutdown on interfaces after power on ?

soroushpour
Level 1
Level 1

how can I force the router to run no shutdown on interfaces after power on ?

1 Accepted Solution

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame

if the ports are configured with no shutdown and wr in the memory, they always come up. (until i hear something different here)?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

7 Replies 7

Hello,

 

you could use an EEM script such as the one below:

 

event manager applet NOSHUT_IF
event syslog pattern "SYS-5-RESTART"
event timer countdown time 10
action 1.0 cli command "enable"
action 2.0 cli command "conf t"
action 3.0 cli command "interface range GigabitEthernet0/1 - 4"
action 4.0 cli command "no shut"
action 5.0 cli command "end"

Thank you

Thank you, I don't know about EEM

balaji.bandi
Hall of Fame
Hall of Fame

if the ports are configured with no shutdown and wr in the memory, they always come up. (until i hear something different here)?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

no shutdown doesn't remain in the memory.

Can you post the device information and show version to look your confreg.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

You are total right, I forgot to copy running config.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: