how to check flash memory in switch

[mohanraj1]

Hi,

I have Cisco 3560 switch. I need to check the flash memory and NVRAM memory. How can i find the information. I'm able to find in show version command but bit confusing, please help me.

[Hythim Ali El Hadad]

Hi Mohan,

You can check it simply with this command:

show file systems

To find more details about this command with 3560

Please refer to the following link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swiosfs.html#wp1257201

Wish this be helpful

[Leo Laohoo · Accepted solution]

Command to check flash memory = dir flash:

Command to check nvram = dir nvram:

Hope this helps.

[Asutosh17_Cisco]

I used the interrupted mode to reset the password of 2950x switch. But after the complete process when I check for sir flash in privilege mode, the reply I get is, Error: loading this flash. But when I reload the flash is intializing in the booting process. Please refer me to some solution.

[ysingh@pinnaclecad.com]

Hi,

I have Cisco C6807-XL switch. I need to check the flash memory and NVRAM memory &Physical Memory  How can i find the information.

[sergerokitchinda]

Hello All, i have the same problem, someone can help us?

[Luther]

show flash: