06-27-2012 10:40 PM - edited 03-04-2019 04:49 PM
I want to configure PAT on the router I have no configuration yet please tell me the procedure.
06-27-2012 11:05 PM
Hi,
If by PAT you mean port address translation, then check these out to get you started on NAT/PAT.
http://www.cisco.com/en/US/technologies/tk648/tk361/tk438/technologies_white_paper09186a0080091cb9.html
http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e51.shtml
HTH.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
