04-05-2019 06:48 AM - last edited on 12-06-2022 03:53 AM by Translator
Smartphone0 to Cell Tower0
Smartphone1 to Cell Tower1
Smartphone2 to Cell Tower2 in 3G/4G
819HGW to Cell Tower2 in 3G/4G
PC14 connect(Wireless) 819HGW
819HGW set DHCP to PC14 "200.200.200.0/24"
Central Office Server0 set DHCP to Smartphone0~2 "172.16.1.0/24"
PC14 SSID= “skills” WPA-PSK= "1234567890" connect to 819HGW
819HGW set NAT PC14 - Smartphone0~2 (do ping)
Solved! Go to Solution.
04-05-2019 08:10 AM
Hi @Kimjohn ,
Follow these steps:
1- Assign static address to your central:
2- Assign address to your 3G network (the network must be different than your central network)
3- By default, cell phones will search for a wireless network, but you only have to change this parameter to search for a 3G network
With that, everything should be ok
Regards
04-05-2019 09:45 AM - last edited on 12-06-2022 03:54 AM by Translator
Hi @Kimjohn ,
To do this, follow these steps:
Router(config)#interface cellular 0
Router(config-if)#ip address negotiated
Router(config-if)#no shutdown
Remember to mark the correct answers as solved, since that helps other users with similar doubts
Regards
04-05-2019 08:10 AM
Hi @Kimjohn ,
Follow these steps:
1- Assign static address to your central:
2- Assign address to your 3G network (the network must be different than your central network)
3- By default, cell phones will search for a wireless network, but you only have to change this parameter to search for a 3G network
With that, everything should be ok
Regards
04-05-2019 08:57 AM
04-05-2019 09:45 AM - last edited on 12-06-2022 03:54 AM by Translator
Hi @Kimjohn ,
To do this, follow these steps:
Router(config)#interface cellular 0
Router(config-if)#ip address negotiated
Router(config-if)#no shutdown
Remember to mark the correct answers as solved, since that helps other users with similar doubts
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: