11-28-2011 12:52 AM - edited 03-04-2019 02:26 PM
Hi.I know how to upload the running or startup config to an ftp server but I was wondering If there Is a way to upload , lets say , the output of a sh ip int commmand ?
Solved! Go to Solution.
11-28-2011 01:18 AM
Hi,
You might think of using the following commands.
Router#show ip interface brief | redirect flash:ShowInt.txt
Then upload ShowInt.txt to where you want.
HTH,
Toshi
11-28-2011 01:38 PM
One step method:
sh ip interface brief | redirect tftp://
11-28-2011 01:18 AM
Hi,
You might think of using the following commands.
Router#show ip interface brief | redirect flash:ShowInt.txt
Then upload ShowInt.txt to where you want.
HTH,
Toshi
11-28-2011 02:10 AM
Thanks again!
11-28-2011 01:38 PM
One step method:
sh ip interface brief | redirect tftp://
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide