07-24-2013 08:23 PM - edited 03-04-2019 08:33 PM
Hi All,
i bought the wrong interface cards vwic3-1mft-e1/t1 and it is not working when my vendor trying to set it up.
Need some advise from you guys, if it is possible to configure the e1/t1 card to run on this g703 unframe link? understand the con will be 1984kbps instead of full 2048kbps.
Thanks in advance.
07-24-2013 09:57 PM
Yes it is possible, but the router on the other side must also be configured for 31 timeslots.
07-24-2013 10:39 PM
Hi Paolo,
so what i need to do are:
1) ask the local loop provider to change the 3 x NTU settings from unframed to Framed.
2) ask the PE router provider to configure their 3 x G703 cards to use timeslots as well.
doing the above at least can get my circuits up and running with 3 x 1984kbps combine. am i right?
07-25-2013 06:42 AM
1. Not needed. The circuit can remain unframed.
2. Yes.
Please remember to rate useful posts clicking on the stars below.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide