ā12-05-2023 04:43 PM
Hello, I saw track object while looking at VRRP CONFIG. This is because through track config, when the line directly connected to the equipment to which the configuration is applied dies, the priority decreases by the value set, so that the stand by state equipment becomes active. I study to know more about this, but I don't fully understand the meaning of each configuration how track config works. I would appreciate it if you could explain it according to the picture below and answer my questions additionally.
Q1. What does the type route reachability at the bottom of track IBC1 mean, and if there are any other types, please let me know.
Q2. I wonder if vrf LTE_VRF is required in the corresponding configuration.
Solved! Go to Solution.
ā12-05-2023 10:01 PM
Hi
This is ios xr tracking
Check below guide
MHM
ā12-05-2023 10:01 PM
Hi
This is ios xr tracking
Check below guide
MHM
ā12-06-2023 04:18 PM
That's what I was looking for!
Thank you for letting me know!
Have a nice day
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide