Insufficient HDLC resource for pri-group - it has been removed

[rmv72]

C1760

I tryed to configure E1 controller -

GW(config)#controller E1 0/0

GW(config-controller)#pri-group timeslots 1-12

%Controller tdm clock does not have voice capability

.%Voice is not enabled on this PRI group

%Controller tdm clock does not have voice capability

%Insufficient HDLC resource for pri-group - it has been removed

GW(config-controller)#

--------------------------------

Part of my config:

!

interface Serial1/0

ip address A.B.C.D 255.255.255.252

encapsulation frame-relay IETF

frame-relay interface-dlci 100

crypto map VPN

!

interface Serial1/1

no ip address

shutdown

!

-----------

How to resolve it?

[m.lammerse]

It looks like you're connecting a ISDN pri *voice* interface to an ISDN pri *data* circuit. They are not compatible.

If you need a data connection, you'll have to change the wic or vwic.

If you need a voice connection, you'll have to change the pri circuit.

[rmv72]

Problem was here-

tdm clock E1 0/0 data export line

^^^^

now-both