08-26-2015 06:22 AM - edited 03-05-2019 02:09 AM
Hi All,
I have a CISCO Router 871 series and purchased a dedicated line from ISP.
I have a LAN setup connected with a CISCO switch getting IPs from DHCP (192.168.10.10) and gateway (192.168.10.1 - -> vlan 1)
Question is how to enable internet on this LAN that has private IPs?
Currently I configured Router's vlan 1 to have IP (192.168.10.1)
Solved! Go to Solution.
09-01-2015 07:57 AM
Sure,
Here is the Show-Running commands from SiteA/RouterA/
09-01-2015 07:57 AM
Can you reread my first response in this thread.
You are missing most of the commands needed to do NAT and they are all included in that response.
Jon
09-02-2015 06:54 AM
Hello Again,
Thanks for reply.
Here is Configurations and screenshots from the server and client.
09-02-2015 06:54 AM
So are you saying it still doesn't work ?
You router configuration looks fine.
The client and server both have a DNS server of 192.168.10.10 so have you configured that server to forward DNS requests to 8.8.8.8 ?
Can you ping an internet IP from the client ?
Jon
09-02-2015 07:40 AM
so have you configured that server to forward DNS requests to 8.8.8.8 ?
Not really. You mean DNS role on server? Or settings on client side? How you want me to do that to avoid any ambiguity?
09-02-2015 07:48 AM
It's up to you.
If you want to use an internal DNS server then you need to setup forwarding on that server.
If you don't then simply use 8.8.8.8 as your DNS server.
Jon
09-02-2015 09:29 AM
If you don't then simply use 8.8.8.8 as your DNS server.
Checked it already, used Primary DNS (as domain controller) and secondary as 8.8.8.8 but no internet :(
09-02-2015 09:54 AM
Can you be more specific ie. how are you testing internet ?
From your client if you ping 8.8.8.8 then what does the router show with "sh ip nat translations" ?
I need more information to help.
Jon
09-09-2015 11:29 PM
sh ip nat translations didnt returned anything , only once it shows entries and then in a second disappeared.
Also VPN setup has been compromised with NAT, I cant ping anymore remote site after NATing (wa working fine before)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide