cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1808
Views
0
Helpful
20
Replies

Internet over Point to Point link

jonnyk123
Level 1
Level 1

We have two sites Site A and Site B

Site A has internet and Site B needs to access the internet from site A

I am using OSPF and both sites can see routes to the other site

Site B has the IP address of site A's end of the point to point as the Gateway of last resort however Site B cant access the internet still

When I do show ip route 0.0.0.0 it points towards the ip of site A's end of the point to point

I need to urgently solve this

Thanks in advance for you help

20 Replies 20

Yes the firewall is natting and natting for any IP trying to access the internet.

So this looks like a simple layer 2 point to point link.  Both sites are under the same network i.e; 10.120.20.xxx/xx.  So your Site B Switch make your Site A Core switch as the next hop not the 10.120.20.22.

jonnyk123
Level 1
Level 1

No they are not under the same network

site A is 10.120.0.0

Site B is 10.121.0.0

Hello,

       Is Your FW running OSPF? 

       Can SideB go to firewall(just test connections)?

       Does Firewall NAT SiteB-Network?

HTH,

Toshi

jonnyk123
Level 1
Level 1

Yes the firewall is running OSPF

Side can ping the firewall


Yes the firewall NATs any address trying to access the internet

From site B, can you ping 4.2.2.1 or 8.8.8.8?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
Review Cisco Networking for a $25 gift card