ios file reqd which supports bgp

[kp_prasanna]

i have an ios file "c2800nm-ipbase-mz.124-3g" for c2851 router.its not supporting bgp .i need an ios file name and ios for c2851 which supports bgp,version 12.4()3g).this is an urgent requirement

[Jon Marshall]

Hi

The easiest way to do this is to use Cisco's Feature Navigator Tool. Had a look for you

Advanced IP services supports BGP

c2800nm-advipservicesk9-mz.12.4-3g.bin

as does

Enterprise Services

c2800nm-entservicesk9-mz.12.4-3g.bin image

HTH

Jon

[kp_prasanna]

hi,

thanks,do u have any ways to download the ios file

c2800nm-advipservicesk9-mz.12.4-3g.bin .i don't have cisco cco login.

[Jon Marshall]

Hi

Unfortunately it's not as simple as that. Because you are upgrading to an image with more features in it there may well be a cost involved.

You need to talk to whoever you normally deal with when purchasing Cisco kit.

Jon

[kp_prasanna]

fine,how to install the ios in an router,basic steps reqd

[guruprasadr]

HI Prasanna,

CISCO IOS installation & upgradation procedure:

http://www.cisco.com/warp/public/130/sw_upgrade_proc_ram.shtml#topic1

Pls Rate if HELPS

Best Regards,

Guru Prasad R

[kp_prasanna]

hi guruprasad,

thanks.in the procedure,it says

Download a TFTP server. Refer to TFTP Server Selection and Use for more information.

Configure the TFTP application to operate as a TFTP server instead of a TFTP client.

u can specify the tftp server reqd and the link to download itand the steps reqd to operate as an server.

[guruprasadr]

HI Prasanna,

"SolarWinds" - is a very good tool for TFTP Server.

You can download a Trial Version / even from http://www.download.com/3120-20_4-0.html?tg=dl-20&qt=SolarWinds&tag=srch

For step-by-step procedure to Setup an TFTP Server (as SolarWinds) - Pls refer Link below:

http://www.solarwinds.net/Toolsets/Help/AdminGuide.htmhttp://www.solarwinds.net/Toolsets/Help/TFTP-Server.htm

Pls do RATE / VOTE all Helpful Replies

Best Regards,

Guru Prasad R

[kp_prasanna]

hi guruprasad

sure,i will check the links given by you.i am leaving out

thanks a lot

keep in touch

prasanna

[inzeos781]

For TFTPD server if you are running a Windows platform I would suggest;

TFTPD32, which is a free download from;

http://tftpd32.jounin.net/

It also includes a DHCP and syslog server functionality. Recommended by Cisco as well.