cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2281
Views
0
Helpful
5
Replies

%IP-IP_NTP-5-SYNC_LOSS : : Synchronization lost

icrncevic1
Level 1
Level 1

RP/0/RP0/CPU0:Dec 27 20:10:45.211 CST: ntpd[336]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.xx.xx.xx vrf VPNV4-MGMT : System clock selection failed
RP/0/RP0/CPU0:Dec 27 20:10:45.211 CST: ntpd[336]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->3.
RP/0/RP0/CPU0:Dec 27 20:19:30.266 CST: ntpd[336]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 3->2.

 

 

I am periodically seeing NTP Synchronization lost followed by NTP peer connection lost. I am not able to find network issues during these bounces. Are these considered expected behavior or can someone explain why and when to expect to see these bounces. 

5 Replies 5

Mark Elsen
Hall of Fame
Hall of Fame

 

 - Probably related to bug(s) , this bug report is an example (only) : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCsz22456  , you don't mention the platform/model this is happening on ,however use latest advisory software version (if applicable) and check if that can  help , 

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Hi,

 

this is on NCS-540 Version 7.1.2

 

 

 - Try : https://software.cisco.com/download/home/286324706/type/280805694/release/7.8.1

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

balaji.bandi
Hall of Fame
Hall of Fame

if this ASR check the  below link may help you :

https://community.cisco.com/t5/switching/asr-9006-ntp-sync-issue/td-p/2680208

still issue you need to provide more information what hardware and version of code ? where is NTP IP located you try to sync, is there any FW between ?

BB

=====Preenayamo Vasudevam=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

This is on NCS-540 Version 7.1.2