cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
437
Views
0
Helpful
4
Replies

ip routing exercise in my attachement

Hello everyone ,

I have my infrastructure in my attechement , but what is the ip routing for my server A and D ? 

 

Can you check my answer please ? thank youuu

Server A

DestinationmaskRouterinterface
192.168.2.0255.255.255.0192.168.1.1 (R12)eth0
192.168.8.0255.255.255.0192.168.8.1 (R13)eth0
192.168.9.0255.255.255.0192.168.8.1(R13)eth0

Server D :

DestinationmaskRouterinterface
192.168.1.0255.255.255.0192.168.8.254(R13)eth1
192.168.9.0255.255.255.0192.168.8.1(R34)eth0
192.168.2.0255.255.255.0192.168.8.254(R13)eth1

 

 

4 Replies 4

Hello,

 

where is Server D ? And what is your question exactly ?

Hello George ,

 

Server D it's my host D ,

 

I would like to define routing table of my host D

 

,) thanx you

Hello
As it stands without any IGP or static routing applied:

Host D with have a connected route and arp entries for itself, R13 - R34 192.168.8..0 /24 via eth0
SRV A with have a connected route and entries for  itself, SRV B, R12 -R13  192.168.1.0 via eth0 
SRV B with have a connected route and entries for  itself, SRV A, R12 -R13  192.168.1.0 via eth0
R12 will have a connected route for 192.168.1.0/24 via eth 1 & 192.168.1.0/24 via eth 0 with arp entries for itself  R13, SRV A,B
R13 will have a connected route for 192.168.1.0/24 via eth 0 with arp entries for itself, R12, SRV A,B & connected interface for 192.168.8.0/24 via eth 1 with arp entries for Host D, R34.

Thus the above will allow communication between host A-D via 192.168.1/0/24


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Yes thank you for you answer, 

 

In your reply with R12, we have 192.168.2.0 via eth1 and 192.168.1.0 via eth0

 

I don't undestand your routing table of server A , my table is similar ?

 

Thanx you

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: