03-15-2021 12:53 PM
Hello everyone ,
I have my infrastructure in my attechement , but what is the ip routing for my server A and D ?
Can you check my answer please ? thank youuu
Server A
Destination | mask | Router | interface |
192.168.2.0 | 255.255.255.0 | 192.168.1.1 (R12) | eth0 |
192.168.8.0 | 255.255.255.0 | 192.168.8.1 (R13) | eth0 |
192.168.9.0 | 255.255.255.0 | 192.168.8.1(R13) | eth0 |
Server D :
Destination | mask | Router | interface |
192.168.1.0 | 255.255.255.0 | 192.168.8.254(R13) | eth1 |
192.168.9.0 | 255.255.255.0 | 192.168.8.1(R34) | eth0 |
192.168.2.0 | 255.255.255.0 | 192.168.8.254(R13) | eth1 |
03-15-2021 01:06 PM
Hello,
where is Server D ? And what is your question exactly ?
03-15-2021 01:17 PM
03-15-2021 02:45 PM - edited 03-15-2021 02:47 PM
Hello
As it stands without any IGP or static routing applied:
Host D with have a connected route and arp entries for itself, R13 - R34 192.168.8..0 /24 via eth0
SRV A with have a connected route and entries for itself, SRV B, R12 -R13 192.168.1.0 via eth0
SRV B with have a connected route and entries for itself, SRV A, R12 -R13 192.168.1.0 via eth0
R12 will have a connected route for 192.168.1.0/24 via eth 1 & 192.168.1.0/24 via eth 0 with arp entries for itself R13, SRV A,B
R13 will have a connected route for 192.168.1.0/24 via eth 0 with arp entries for itself, R12, SRV A,B & connected interface for 192.168.8.0/24 via eth 1 with arp entries for Host D, R34.
Thus the above will allow communication between host A-D via 192.168.1/0/24
03-16-2021 10:49 AM
Yes thank you for you answer,
In your reply with R12, we have 192.168.2.0 via eth1 and 192.168.1.0 via eth0
I don't undestand your routing table of server A , my table is similar ?
Thanx you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide