I have an IP SLA as below, the result is always timeout. have tried debug, but not much information
ip sla 25
icmp-echo 10.255.32.25 source-ip 10.255.32.1
timeout 2000
vrf Corp
frequency 10
RTR01#sh ip sla statistics 25
Round Trip Time (RTT) for Index 25
Latest RTT: NoConnection/Busy/Timeout
Latest operation start time: .14:51:44.215 BST Wed Aug 13 2014
Latest operation return code: Timeout
Number of successes: 0
Number of failures: 28
Operation time to live: Forever
-RTR01#sh ip sla conf 25
IP SLAs, Infrastructure Engine-II.
Entry number: 25
Owner:
Tag:
Type of operation to perform: echo
Target address/Source address: 10.255.32.25/10.255.32.1
Type Of Service parameter: 0x0
Request size (ARR data portion): 28
Operation timeout (milliseconds): 2000
Verify data: No
Vrf Name: Corp
Schedule:
Operation frequency (seconds): 10
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Randomly Scheduled : FALSE
Life (seconds): Forever
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): Active
Threshold (milliseconds): 5000
Distribution Statistics:
Number of statistic hours kept: 2
Number of statistic distribution buckets kept: 1
Statistic distribution interval (milliseconds): 20
History Statistics:
Number of history Lives kept: 0
Number of history Buckets kept: 15
History Filter Type: None
Enhanced History:
-RTR01#ping vrf Corp 10.255.32.25 source 10.255.32.1
IF YOU PING THE DEVICE MANUALLY, ALL SEEMS OK
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.255.32.25, timeout is 2 seconds:
Packet sent with a source address of 10.255.32.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 55/56/57 ms
HEX-SBT-RTR01#
