I want to configure Reliable static routing with object tracking. I have a cisco 3825 and 3925 router in which the hsrp will be configured . Now these two routers are connected a remote site via three different WAN connectivity as under
The priority of routing is also the same sequence.
Now if the MPLS goes down the remote site should be connected via LL-1. If both the MPLS and LL-1 goes down the remote site should be connected via LL-2.
The LL-1 is terminated on cisco 3825 and LL-2 is terminated on cisco 3925. MPLS is terminated on both cisco 3825 as well as 3925 router.
Whether multiple tracking options are available so that i can achieve the same.
Topology diagram is attached.
Thanx for the reply. Policy feature routing is gr8 feature. Just wanted to know in my setup i am using static routing on 3825, 3925 and 1841 router. I dont want to load balancing of traffic, but if the MPLS connectivity goes down the 1841 should get connected via LL-1 and if LL-2 goes down it should get connected via LL-2 which is connected on 3925.
My concern is i have seen reliable static routing with object tracking with two WAN connectivity, but if three WAN connection are available how to achieve that
What i was planning to do is create two ip sla's
ip sla monitor 1
type echo protocol ipicmpecho 200.x.x.1 // Public IP of 1841 router on MPLS connectivity
ip sla monitor schedule 1 start-time now life forever
ip sla monitor 2
type echo protocol ipicmpecho 172.16.2.1 // Leased Line-1 IP of 1841 router
ip sla monitor schedule 2 start-time now life forever
track 123 rtr 1 reachability
track 124 rtr 2 reachability
ip route 172.16.4.0 255.255.255.0 200.x.x.4 track 123 // to MPLS
ip route 172.16.4.0 255.255.255.0 172.16.2.1 track 124 10 // to LL-1
ip route 172.16.4.0 255.255.255.0 172.16.1.10 20 // traffic will be forwarded to router 3925