10-06-2012 03:33 AM - edited 03-04-2019 05:46 PM
Hello,
We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commands
ip sla 2
icmp-echo 172.16.1.2
timeout 500
frequency 1
ip sla schedule 2 life forever start-time now
track 10 rtr 1 reachability
delay down 1 up 1
!
track 20 rtr 2 reachability
delay down 1 up 1
ip route 0.0.0.0 0.0.0.0 192.168.1.2 track 10
ip route 0.0.0.0 0.0.0.0 172.16.1.2 track 20
Im asking above question because we will need to enable ip-sla on the mentioned router. as i read on the cisco webside, it says Cisco-ISR-1921/K9-IP Base support only IP-SLA RESPONDER feature nothing else. so that is why im asking any expert ideas
If Cisco-1921/K9 does not support the above commands , should i go for ordering Cisco-1921-SEC/K9 ?
10-06-2012 03:24 PM
You can order the base router. If the commands are not available, enable the temrporary data license and order data license.
The secuirty license is not needed.
02-16-2016 04:25 AM
Dear Paolo
Greetings
How to enable the temporary data license and to order data license?
Best Regards
ART
10-06-2012 05:31 PM
Data licnece is needed for IP SLA
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide