hi,
I have this config,
when I remove the dsl cable from the router, tracking shows all 3 objects as down and then it goes to dialer1.
problem I have is when I plug the dsl cable back, all the objects stay to DOWN even after 5 minutes it just never goes back to UP state so it never goes back to my dialer0.
I was under the impression that when dsl comes up, tracking will go up and things will move over to the main dsl line.
I'm running this on a 891 router with ios Version 15.2(4)M3
track 1 list boolean or
object 12
object 13
object 14
delay up 60
!
track 12 ip sla 12 reachability
!
track 13 ip sla 13 reachability
!
track 14 ip sla 14 reachability
ip route 0.0.0.0 0.0.0.0 Dialer0 track 1
ip route 0.0.0.0 0.0.0.0 Dialer1 2
ip sla 12
icmp-echo <IP ON THE INTERNET> source-interface Dialer0
frequency 30
ip sla schedule 12 life forever start-time now
ip sla 13
icmp-echo <IP ON THE INTERNET> source-interface Dialer0
frequency 30
ip sla schedule 13 life forever start-time now
ip sla 14
icmp-echo <IP ON THE INTERNET> source-interface Dialer0
frequency 30
ip sla schedule 14 life forever start-time now
