07-17-2018 05:52 PM - edited 03-05-2019 10:47 AM
Does anyone know how to create an inbound ipv6 filter access-list to allow return traffic?
I tried the following but that didn't work:
ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log-input
and the outbound is:
ipv6 access-list ipv6-outbound
permit tcp any any eq 80
permit tcp any any eq 443
deny tcp any any log-input
interface XX
ipv6 traffic-filter ipv6-inbound in
ipv6 traffic-filter ipv6-outbound outbound
Thank you!
Solved! Go to Solution.
07-18-2018 12:38 PM
Looks like ACL name is not ipv6-inbound:
ipv6 access-list inbound permit tcp any any established deny ipv6 any any log-input
but you apply ipv6-inbound
HTH.
07-18-2018 12:38 PM
Looks like ACL name is not ipv6-inbound:
ipv6 access-list inbound permit tcp any any established deny ipv6 any any log-input
but you apply ipv6-inbound
HTH.
07-18-2018 01:38 PM
Thank you Rais for noticing my ACL name was not applied correctly.
That did point me to the right direction and I was able to fix the issue.
thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide