ISDN PRI

[drnteam]

Hi,

Did any one face the above error when configuring the PRI.

AEDICR08(config-controller)#pri-group timeslots 1-31

% Not enough DSP resources available to configure pri-group on controller E1 0/0

/0

% The remaining dsp resources are enough for 0 time slots.

% For current codec complexity, 2 extra dsp(s) are required to create this voice

port.

Also i am not able to configure the card type. My router type is 2800.

Eldo

[paolo bevilacqua]

The vwic card that you're using is meant for voice mainly and need DSP resource when configuring PRI. Are you configuring the router for voice applications ?

Card type is needed only when you have vwic2, you have vwic.