ā05-12-2015 02:13 AM - edited ā03-05-2019 01:26 AM
Hello,
i've a ISR 4331 with a SM-X-ES3-16-P module, when i'm accessing trough console to the ISR then i access to the module, i don't find a way to exit the module and return to the router console, i've tried ctrl+shift+6+^x plus disconnect, ctrl+^c, commands exit, end but the connection remains, i only return to the console router session when i reload the physical equipment, anyone knows a way to exit the module?
ā05-29-2015 03:14 PM
A post in this discussion has been removed due to possible misconduct. Please refer to the CSC terms of use for more details.
ā06-02-2015 08:19 AM
When you open a session with the SM-X-ES3-16-P module you should have seen the notice (below) about how to exit the session. You need to enter CTRL+a CTRL+q to exit the session.
Establishing session connect to subslot 1/0
To exit, type ^a^q
picocom v1.4
port is : /dev/ttyDASH0
flowcontrol : none
baudrate is : 9600
parity is : none
databits are : 8
escape is : C-a
noinit is : no
noreset is : no
nolock is : yes
send_cmd is : ascii_xfr -s -v -l10
receive_cmd is : rz -vv
Terminal ready
ā03-13-2018 10:45 AM
Thanks for the tip. I was trying to type ^a^q instead of using the Ctrl keys.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide