Good morning, I need some help to do a script using a xml holiday file. I have a sript, that i chek the days of the week, and if it is holiday it goes to a Prompt, if it is not it goes to a call redirect. But it is not working, i dont know why. Can annyone help me?  Xml file ... View more

Hello,   i've a network with MPLS and Cisco ME3600X, anda i want to know what is the limit number of VPN that i can create in this equipment, anybody knows?     ... View more

Hello,  i've a MPLS network, and i'm configuring a ISR 4331 with Cisco IOS XE Software, Version 03.13.02.S, my connection with the WAN is through a Ethernet connection, and i'm using OSPF for WAN connection and the OSPF receive all the routes in databsae but not all the routes passes to the routing table, i don't have any filter on OSPF. If i do the same configuration on same interface without vrf lite works normally. Do you have any idea of the cause of this problem? My ospf database:             OSPF Router with ID (10.200.100.74) (Process ID 999)                 Router Link States (Area 0) Link ID         ADV Router      Age         Seq#       Checksum Link count 10.200.100.74   10.200.100.74   1225        0x80000010 0x005BAB 1 10.200.100.94   10.200.100.94   1243        0x800000C3 0x00CB4B 1                 Net Link States (Area 0) Link ID         ADV Router      Age         Seq#       Checksum 10.200.100.94   10.200.100.94   1243        0x80000009 0x0018F6                 Type-5 AS External Link States Link ID         ADV Router      Age         Seq#       Checksum Tag 10.200.0.1      10.200.100.94   988         0x8000000A 0x00CB14 3489725440 10.200.0.2      10.200.100.94   988         0x8000000A 0x00C11D 3489725440 10.200.0.3      10.200.100.94   988         0x8000000A 0x00B726 3489725440 10.200.0.4      10.200.100.94   988         0x8000000A 0x00AD2F 3489725440 10.200.0.5      10.200.100.94   1243        0x80000009 0x002407 0 10.200.0.6      10.200.100.94   988         0x8000000A 0x009941 3489725440 10.200.0.7      10.200.100.94   988         0x8000000A 0x008F4A 3489725440 10.200.0.12     10.200.100.94   988         0x8000000A 0x005D77 3489725440 10.200.0.13     10.200.100.94   988         0x8000000A 0x005380 3489725440 10.200.0.19     10.200.100.94   988         0x8000000A 0x0017B6 3489725440 10.200.0.20     10.200.100.94   988         0x8000000A 0x000DBF 3489725440 10.200.103.96   10.200.100.94   988         0x80000008 0x00E950 3489725440 10.200.150.0    10.200.100.94   988         0x8000000A 0x00A2C6 3489725440 10.200.253.20   10.200.100.74   1225        0x80000009 0x001C16 0 192.168.65.0    10.200.100.94   1243        0x80000009 0x00C295 0   My routing table:         10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks O E2     10.200.0.5/32             [110/20] via 10.200.100.94, 00:14:56, GigabitEthernet0/0/0.999 C        10.200.100.64/27 is directly connected, GigabitEthernet0/0/0.999 L        10.200.100.74/32 is directly connected, GigabitEthernet0/0/0.999 C        10.200.253.20/32 is directly connected, Loopback999 O E2  192.168.65.0/24             [110/20] via 10.200.100.94, 00:14:56, GigabitEthernet0/0/0.999   My OSPF configuration:   router ospf 999 vrf GESTAO_EMACOM  router-id 10.200.100.74  redistribute connected subnets  passive-interface default  no passive-interface GigabitEthernet0/0/0.999  network 10.200.100.64 0.0.0.31 area 0 ... View more

Hi,   i've two Cisco ASA firewalls an i want to made a ipsec l2l tunnel betwen the both, the problem is both sides have dynamic IP, in both sides i've dyndns configured, can i made a ipsec tunnel using de dyndns name as a peer address? ... View more

Hi, i'm installing CCME with ios 15.0(1r)M16 and with CME version 9.1, i'm trying toconfigure a 7962 telephone, intially i've decompressed to the router the firmware for this telephone and configured the tftp server, when the telephone starts it doesn't update the firmware to my version (9.2.1), the telephone brings the version 9.3.1.3, so i thinked that the problem is the version from the phone is newer than mine version, so i've made a soft factory reset, after tis i saw the telephone doanloading the first file from the firmware but never updates, so i've installed in the CME a older version (8.3.3.S) the problem persists, and i've done a hard factory reset, and now the telephone stils with the same problem and never updates de the firmware i've the follwing files in flash: extracting apps42.8-3-2-27.sbn (2496963 bytes) extracting cnu42.8-3-2-27.sbn (585562 bytes) extracting cvm42sccp.8-3-2-27.sbn (2452185 bytes) extracting dsp42.8-3-2-27.sbn (326315 bytes) extracting jar42sccp.8-3-2-27.sbn (443607 bytes) extracting SCCP42.8-3-3S.loads (658 bytes) extracting term42.default.loads (662 bytes) extracting term62.default.loads (662 bytes) and the follwing tftp server commands: tftp-server flash:apps42.8-3-2-27.sbn tftp-server flash:cnu42.8-3-2-27.sbn tftp-server flash:cvm42sccp.8-3-2-27.sbn tftp-server flash:dsp42.8-3-2-27.sbn tftp-server flash:jar42sccp.8-3-2-27.sbn tftp-server flash:SCCP42.8-3-3S.loads tftp-server flash:term42.default.loads tftp-server flash:term62.default.loads in telephony service i've configured the load command like that: load 7962 term62.default The output of debug tftp evensts is like that: Dec  9 22:19:51.091: TFTP: Looking for term62.default.loads Dec  9 22:19:51.095: TFTP: Opened flash0:term62.default.loads, fd 9, size 662 for process 377 Dec  9 22:19:51.095: TFTP: Finished flash0:term62.default.loads, time 00:00:00 for process 377 Anyone have a clue about this problem and how can i install a firmware in this telephone? ... View more