Hi all,
I have an issue that ISR 4331 {ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.1, RELEASE SOFTWARE (fc2)} creates an additional virtual access interface when a dialer is mapped to a gig interface when the E1 card (NAME: "NIM subslot 1/0", DESCR: "NIM-1MFT-T1/E1 - T1/E1 Serial Module") is connected. see bellow
interface GigabitEthernet0/0/1
bandwidth 4000
bandwidth receive 10000
no ip address
negotiation auto
pppoe enable group global
pppoe-client dial-pool-number 1
!
6#sh user
Line User Host(s) Idle Location
* 0 con 0 install idle 00:00:00
Interface User Mode Idle Peer Address
Vi3 REFRESH-LNS PPPoE 00:00:02 1.1.1.1
Vi4 REFRESH-LNS PPPoE 00:00:02 1.1.1.1
-The issue is only present while the E1 card is connected.
