cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
870
Views
0
Helpful
1
Replies

ISR4331 LTE sim. How to get it to work?

KonstantinC
Level 1
Level 1

Hello guys,


Previously I had ISR 2901 router with LTE modem. Sim card worked fine.

2901#sh cellular 0/0/0 profile
Profile password Encryption level: 7
Profile 1 = ACTIVE* **
--------
PDP Type = IPv4
PDP address = 10.10.10.11
Access Point Name (APN) = MYAPN
Authentication = CHAP
Username: user
Password: 09315A1A
Primary DNS address = 255.255.255.255
Secondary DNS address = 255.255.255.255
Primary DNS IPV6 address = 0
Secondary DNS IPV6 address = 0
* - Default profile
** - LTE attach profile

 

Then I bought new ISR 4331 with:

NAME: "NIM subslot 1/0", DESCR: "NIM-LTEA-EA Module"
NAME: "Modem 0 on Cellular1/0/0", DESCR: "Sierra Wireless EM7455 EA"

inserted my old sim card to the new router, configured profile

.... and I can't configure ip address on it.
Profile is inactive also.


4331#sh cellular 1/0/0 profile
Profile password Encryption level: 7

Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = MYAPN
Authentication = CHAP
Username: user
Password: 0702455F

Profile 2 = INACTIVE
--------
* - Default profile
** - LTE attach profile


Configured default profile for active SIM 0 is profile 1.


Does anybody know how to get it to work?

1 Accepted Solution

Accepted Solutions

KonstantinC
Level 1
Level 1

Ufff... sorry

 

I forgot to configure dialer:

dialer watch-list 1 delay route-check initial 60
dialer watch-list 1 delay connect 60
dialer watch-list 1 delay disconnect 2147483
dialer-list 1 protocol ip list 1

 

Now all work fine

View solution in original post

1 Reply 1

KonstantinC
Level 1
Level 1

Ufff... sorry

 

I forgot to configure dialer:

dialer watch-list 1 delay route-check initial 60
dialer watch-list 1 delay connect 60
dialer watch-list 1 delay disconnect 2147483
dialer-list 1 protocol ip list 1

 

Now all work fine

Review Cisco Networking for a $25 gift card