12-03-2010 01:28 AM - edited 03-04-2019 10:40 AM
Hi,
I have a serious problem bringing up an GRE Tunnel combined wir vrf-lite funktion. A 2951 Version 15.0(1)M3 with fixed internet uplink has a tunnel to a 2811 12.4(13r)T with PPPoE session (fixed IP).
without VFR everything seems to be ok:
C2951 | C2811 |
---|---|
interface FastEthernet0/1/0 | interface Tunnel2 interface FastEthernet0/0/0 interface Dialer2 |
status of int tu12: UP | status of int tu1 2:UP |
OK, this looks good.
no I try to bring in VRF:
Header 1 | Header 2 |
---|---|
ip vrf INTERNET description Public-IP-Traffic rd 1:1 route-target export 1:1 route-target import 1:1 interface Tunnel12 description Tunnel_PPPoE_nach_Buchhandlung bandwidth 2000 ip address 10.1.12.17 255.255.255.240 keepalive 10 2 tunnel source A.A.A.A tunnel destination B.B.B.B tunnel path-mtu-discovery tunnel vrf INTERNET interface FastEthernet0/1/0 description Anschluss DMZ Telekom-Router bandwidth 34000 ip vrf forwarding INTERNET ip address A.A.A.A z.z.z.z ip nat outside ip virtual-reassembly ip tcp adjust-mss 1400 duplex auto speed auto ip route vrf INTERNET 0.0.0.0 0.0.0.0 A.A.A.GW | interface Tunnel2 interface FastEthernet0/0/0 interface Dialer2 ip route 0.0.0.0 0.0.0.0 Dialer2 200 |
status of int tu12: UP | status of int tu2: DOWN |
It should work but...
I try to bring ing VRF to be able to externally ping A.A.A.A
Does anybody have a idea?
/br
Thomas
12-03-2010 12:23 PM
Thomas,
When you have the VRF configured on your C2951, can you at least ping the B.B.B.B address from C2951 using the command ping vrf INTERNET B.B.B.B? Also, can you ping A.A.A.A at the same time from your C2811?
Best regards,
Peter
12-06-2010 02:07 AM
Hi Peter,
yes ping vrf is working.
/br Thomas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide