Hello
I am to setup a setup something like this:
Wanted to check to pass all the VLANs 100, 200, 300, 400 do I have to create subinterfaces on RTR A and RTR B for each of the VLANs and create xconnect with different cirucit id to pass all the VLANs or am i thinking on the wrong path?
Something like this
RTR A
interface FastEthernet0/1.100
description DATA1
encapsulation dot1Q 100
xconnect 1.1.1.2 10201301 pw-class A.PW.to.B
interface FastEthernet0/1.200
description DATA2
encapsulation dot1Q 200
xconnect 1.1.1.2 10201302 pw-class A.PW.to.B
interface FastEthernet0/1.300
description DATA3
encapsulation dot1Q 300
xconnect 1.1.1.2 10201303 pw-class A.PW.to.B
interface FastEthernet0/1.400
description DATA4
encapsulation dot1Q 400
xconnect 1.1.1.2 10201304 pw-class A.PW.to.B
Any advice will be much appreciated
Many Thanks in advance