Layer 2 Tunneling Protocol (L2TP) over IPsec on ISR 1921

[ElwinMkanyika]

Guys,

Is it possible to configure Layer 2 Tunneling Protocol (L2TP) over IPsec on a cisco router like 1921 ISR? This link shows basically what i want to achieve but instead of an ASA, i would like to use just a router with sec....Please help? Is it possible?

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807213a7.shtml

[Torsten Jahnke]

Congratulation m8! :-)

This is not a solution. This is an challenge ;-)

In short answer, yes - it is possible.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093f6f.shtml

[ElwinMkanyika]

Hi Torsten,

I saw that link. The issue is that i only have 1 router...not two as in the solution that you provided.

I would like a solution like this:

XP - Internet - Router - Corporate network

[jurodri3]

Hello Mr. Mkanyika,

Thank you for your question.

However, the Small Business Support Community is limited to Cisco Small Business Products and the 1921 router is considered as an Integrate Services product.

You might consider to ask this question at Enterprise forum to get a better response.

http://www.cisco.com/en/US/products/ps10819/index.html

Best regards,

Diego Rodriguez

Cisco Small Business Community Engineer Best regards.