08-09-2020 10:46 AM
Hi there,
I'm trying to install a security license on my cisco 1111P, I have a .lic file in the flash but when I try to install the router is not recognize the commands, "just accept license smart register idtoken"
Cisco IOS XE Software, Version 16.09.02
The lic file was send me from cisco
Somebody have a suggestion for install it?
Thank you in advance
08-09-2020 10:55 AM
Hope you are trying to register your smart licensing. Smart license require Smart account( account should be with the client domain name) and the license will be deposited in Smart account. you need to generate a token from Smart account and use the same on router.
go through the link to learn more.
Step 1 | enable Example:Device> enable | Enables privileged EXEC mode.
| ||
Step 2 | configure terminal Example:Device# configure terminal | Enters global configuration mode. | ||
Step 3 | license smart enable Example:Device# license smart enable | Activates Smart Licensing on the device.
For the ‘no’ case, if Smart Licensing is already registered, the Smart Agent performs the ”license smart deregister” operation that deactivates Smart Licensing. | ||
Step 4 | exit Example:Device# exit | Exits the global configuration mode. | ||
Step 5 | write memory Example:Device# write memory | Saves the running configuration to NVRAM. | ||
Step 6 | show license all Example:Device# show license all | (Optional) Displays summary information about all licenses. |
Step 1 | enable Example:Device> enable | Enables privileged EXEC mode.
| ||
Step 2 | configure terminal Example:Device# configure terminal | Enters global configuration mode. | ||
Step 3 | no license smart enable Example:Device(config)# no license smart enable | Deactivates Smart Licensing on the device.
| ||
Step 4 | exit Example:Device(config)# exit | Exits the global configuration mode. | ||
Step 5 | write memory Example:Device# write memory | Saves the running configuration to NVRAM. | ||
Step 6 | reload Example:Device# reload | (Optional) Restarts the device to enable the new feature set.
| ||
Step 7 | show license all Example:Device# show license all | (Optional) Displays summary information about all licenses. |
Step 1 | enable Example:Device> enable | Enables privileged EXEC mode.
| ||
Step 2 | license smart register idtoken idtoken [force] Example:Device# license smart register idtoken 123 | Registers the device with the back-end server. Token id can be obtained from your virtual a/c in the Smart Licensing server.
| ||
Step 3 | license smart deregister Example:Device# license smart deregister | Deregisters the device from the backend server. | ||
Step 4 | license smart renew [ID | auth] Example:Device# license smart renew ID | (Optional) Manually renews the ID certification or authorization. |
08-15-2020 08:27 AM
Hi,
Thank you for your support! The issue was resolved.
Kind regards.
06-08-2021 12:14 AM
Sorry for late post.
We are going to buy c1111-8p with CON-3SNT-C11118P smarnet
does we neet to purchase any additional license for sec-k9 ?
and what it default lic ? ipbase?
10-22-2023 04:36 AM
Hello @Nithin Eluvathingal to activate the license using smart license means the device must be reacheable to the internet or cisco web?
10-22-2023 10:03 PM - edited 10-22-2023 10:16 PM
It depends on the setup, it can be direct which you Connect your device to CSSM(cloud) or you can have SSM(onprem) in which device connect to your on prem server. SSM need to connect with CSSM for license syncing or on an Air gap network you need to sync it manually uploading files.
https://www.cisco.com/c/en_my/products/software/smart-accounts/software-licensing.html#~stickynav=4
06-07-2021 10:45 PM
Sorry for late post.
We are going to buy c1111-8p with CON-3SNT-C11118P smarnet
does we neet to purchase any additional license for sec-k9 ?
and what it default lic ? ipbase?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide