Load Balancing on Cisco ASR1002

[vaib7av.shirkul]

Hi,

One of our customer just purchased ASR1002 router, they have three internet links from different ISPs and they dont have any remote site,

they have three different public IP pool as their respective ISPs.

So, is it possible to load balance the internet traffic using all three link on Cisco ASR router ( IOS - Advance Enterprise Services)

Thanks,

[Giuseppe Larosa]

Hello Vaib7av.shirkul,

your scenario means multihoming with NAT.

You should read the following whitepaper

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091c8a.shtml

Hope to help

Giuseppe

[shijomon scaria]

Hi, you cannot do conventional load balancing in cisco routers. I believe what you can do in this case is policy NAT.

Thanks,

Shijo

Sent from Cisco Technical Support iPhone App