07-16-2008 08:42 AM - edited 03-03-2019 10:45 PM
Hi, I am looking a solution of load balancing between two ISP links which is configured on Router. Please suggest... Thanks.
07-16-2008 08:48 AM
See:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml
Note, you need to configure 2 default static routes, the example in the document above doesn't do that.
Please rate post if it helps!
07-16-2008 08:50 AM
Hi nikuhappy2010,
A lot of techniques available for load-balance, so if you would like to share your topology and requirements or even more clarification about your setup i will be grateful.
Best Regards,
Mounir Mohamed
07-18-2008 05:59 AM
Hi,
Load balancing can be achieved in numerous ways. Please provide more details regarding your existing setup.
One is, if you have to links to a different upstream providers, you can use BGP to load balance traffic. This allows a fail-over which is useful in many cases.
Thanks,
k0rg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide