04-30-2012 03:07 AM - edited 03-04-2019 04:12 PM
Hi Team,
I am facing low relaiblity issue in one of the ethernet port even no link is connected to that port.
is that a harware issue?
=============================================================================
Router model : cisco 3660
IOS - c3660-ik8s-mz.122-24a.bin
Ethernet1/2 is up, line protocol is down
Hardware is AmdP2, address is 0007.85fb.c312 (bia 0007.85fb.c312)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 128/255, txload 1/255, rxload 1/255
interface Ethernet1/2
no ip address
half-duplex
Ethernet1/2 is up, line protocol is down
Hardware is AmdP2, address is 0007.85fb.c312 (bia 0007.85fb.c312)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 128/255, txload 1/255, rxload 1/255
interface Ethernet1/2
no ip address
half-duplex
=============================================================================
04-30-2012 03:32 PM
is that a harware issue?
No. It' means that you've got a (excuse the adjective used) pathetic ethernet cable.
04-30-2012 05:12 PM
Try:
shutdown
and stop looking at it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide