I am hoping someone can first inform me if this is even possible and second provide guidance as to how I would go about setting it up in the ME switch.
I have a sanario where there are 3 locations. Each location endpoint is tagging packets for vlan 100. The WAN service provider is then using QinQ and adds a different S-VLAN for each location. At a forth location those S-VLANs then show up on my ME 3400E switch via an NNI port with the C-VLAN of 100 inside each. Is there any way to bridge the C-VLAN of 100 inside the individual S-VLANs on the ME switch?
My goal is to link all locations together on vlan 100.
Thanks
Tim
P.S. I attached a PDF with a diagram of the network I am describing.
