09-24-2009 04:25 AM - last edited on 03-25-2019 03:26 PM by ciscomoderator
please what is the actual/total memory on this switch.
SW1#sh ver
Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 18:15 by nachen
Image text-base: 0x00003000, data-base: 0x01300000
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
SW1 uptime is 2 hours, 34 minutes
System returned to ROM by power-on
System image file is "flash:c3560-ipservices-mz.122-35.SE5/c3560-ipservices-mz.122-35.SE5.bin"
cisco WS-C3560G-24TS (PowerPC405) processor (revision D0) with 122880K/8184K bytes of memory.
Processor board ID FOC1316Z7Q5
Last reset from power-on
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
09-24-2009 05:02 AM
128 MB DRAM
09-24-2009 05:34 AM
PLEASE EXPLAIN THIS PART.....
SW1#sh memory summary
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 1E131A4 94334556 13838976 80495580 78602960 79864996
I/O 7800000 8380416 3642196 4738220 4738220 4736768
Driver te 1200000 1048576 44 1048532 1048532 1048532
09-24-2009 11:52 AM
Interesing, I didn't find command documented in 3560 docs. However, should be similar to information seen here: http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf013.html#wp1126419
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide