MGCP Gateway - Siemens

[Jose Arango]

Hello.

I have two PRI interfaces against a siemens platform. The gateway is configured with MGCP signaling, when i try to transfer from  PSTN - Siemens to Cisco,  i lose the call but when i transfer from Cisco to Siemens it  works.

Communication Manager 7.1.3 - Siemens Hipath 4000

Thanks

Jose Luis Arango

[Tim Smith]

Hi mate..

First step I'd suggest is to check output of "debug isdn q931" on the voice gateway.

There will be a disconnect code in there.

See what it is and if it makes any sense.

When you say transfer.

Do you mean an actual call transfer?

Cheers,

Tim.