Migration from IOS XE SDWAN to VIPTELLA

[gaz110480]

Hello all, i have some standalone routers (1100-4G)that i have been asked to install VIPTELLA 20.3.3 onto

They are currently running IOS XE SDWAN isr1100be 17.4.1a

Having looked all morning but without any luck, is there any documentation on how to achieve this migration anywhere, i have only console and cli access, nothing is in operational mode, i dont have v manage

Thank you

[balaji.bandi]

how are you managing your SD-wan Environment. ( you need to suite like vsmart, vbond and vmanage part of the solution)

other than cEdge  and vEdge , i do not see any difference here, configured your running interface as cEdge in vEdge ?

what is the challenge here ?

[gaz110480]

The SDWAN environment doesn't exist yet, i simply want to know if possible to convert from IOS XE SDWAN to Viptela OS without having a suite in place to do this, IE i only have console/CLI based access at this moment?

[Eric2154]

1. Copy the viptela image to your IOSXE bootflash

2. Router#request platform software sdwan software install bootflash:<viptela image>
 
3 Router#show sdwan software

VERSION ACTIVE DEFAULT PREVIOUS CONFIRMED TIMESTAMP
------------------------------------------------------------------------------
X.X.X.X.X false false false - 2024-08-12T16:17:46-00:00

4. Router#request platform software sdwan software activate X.X.X.X.X
after this command it should reload in Viptela OS 
NOTE. You will need to change Baud rate to 115200 when the reload has happened.

Hope this helps