03-08-2016 04:01 AM - edited 03-05-2019 03:31 AM
Hello.....!
Kindly look my attached network diagram
Router 1 is connected to our corporate network 192.168.1.0/24 we are connected into our data centre through a IPSec GRE tunnel VPN
I want to route all the internet traffic through router 2 but VPN should work remain same
Is it possible.? if yes how?
Router 1 current configuration for your reference
!
ip route 0.0.0.0 0.0.0.0 dialer1
!
ip nat inside source list NAT interface Dialer1 overload
!
Extended IP access list NAT
10 permit ip 192.168.1.0 0.0.0.255 any
!
int dialer1
ip nat outside
!
int vlan1
192.168.1.1
ip nat inside
!
Solved! Go to Solution.
03-14-2016 04:20 AM
we have 2 public ip address one ip is reachable from everywhere one ip is not reachable only from Moscow. do you have any idea?
Sorry for continuous disturbing.
03-14-2016 12:28 PM
It might be an idea to post a new thread, as this is a new problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide