NCS5508 Where is show environment

[dloliveira]

Im using NCS 5508 with IOSXR 7.1.2 and im looking for the show environment command did it change ?

[marce1000]

 - Still being mentioned here : https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/hardware-install/b-ncs5500-hardware-installation-guide/b-ncs5500-hardware-installation-guide_chapter_0100.html . what do you have available from show ?

 M.

[dloliveira]

This is a show version and an attempto run show environment

RP/0/RP0/CPU0:DCRTR01#show version
Fri Jan 14 13:35:06.453 BRT
Cisco IOS XR Software, Version 7.1.2
Copyright (c) 2013-2020 by Cisco Systems, Inc.

Build Information:
 Built By     : ahoang
 Built On     : Sat Aug 29 13:28:37 PDT 2020
 Built Host   : iox-ucs-025
 Workspace    : /auto/srcarchive13/prod/7.1.2/ncs5500/ws
 Version      : 7.1.2
 Location     : /opt/cisco/XR/packages/
 Label        : 7.1.2

cisco NCS-5500 () processor
System uptime is 23 weeks 1 day 18 hours 40 minutes

RP/0/RP0/CPU0:DCRTR01#show environment
                                ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:DCRTR01#

For show ? I have:

RP/0/RP0/CPU0:DCRTR01#show ?
  aaa                      Show AAA configuration and operational data
  aal                      Show AAL data
  access-lists             Access lists
  address-pool             Local address pool
  adjacency                Adjacency information
  af-ea                    AF-EA Platform details(cisco-support)
  alarm-mgr                Show alarm mgr traces
  alarms                   Show Alarms associated with XR
  aliases                  Display alias commands
  am-client-lib            Show alarm mgr client lib debug information
  amt                      AMT show commands
  app-obj                  APP-OBJ Show Commands(cisco-support)
  apply-group              List of all applied groups in the system
  aqsm                     AQSM show commands(cisco-support)
  aqsmlib                  AQSMLIB show commands(cisco-support)
  arm                      IP ARM information
  arp                      ARP show commands
  arp-gmp                  ARP show commands(cisco-support)
  ascii-ltrace             ASCII ltrace information(cisco-support)
  asic-errors              ASIC error information
  async                    Async messaging information(cisco-support)
  attribute                IM Attributes operations information(cisco-support)
  auth-service             Show authentication service
  auto-ip-ring             Auto Ip Ring information
  auto-rp                  Auto-RP Commands
  bag-schema               Bag-schema database show commands(cisco-support)
  bcdl                     Show Bulk Content DownLoader information
  bcdlv2                   Show BCDLv2 (Bulk Content DownLoader Ver2) information
  bfd                      BFD information
  bfd-hw-offload           BFD platform related details(cisco-support)
  bfm                      BFM show commands(cisco-support)
  bgp                      BGP show commands
  breakout-mode            Display information about Breakout
  bridgemib                show bridge-mib component(cisco-support)
  buffer-manager           Show all buffer manager memory related information
  bulkstat                 Bulkstat show commands
  bundle                   Show information for bundles interfaces.
  c2y                      c2y
  calendar                 Display the system calendar
  call-home                Show command for call home
  captured                 captured packet information(cisco-support)
  cbp                      Show Common Buffer Pool information
  cdm                      CDM show commands(cisco-support)
  cdp                      CDP information
  cds                      CDS related commands
  cef                      CEF show commands
  cema                     Show trace data for the cema component(cisco-support)
  cerrno                   Cerrno Infrastructure show commands(cisco-support)
  cfgmgr                   Cfgmgr related show commands(cisco-support)
  checkpoint               Show checkpoint services(cisco-support)
  cih                      Show cai cih information(cisco-support)
  cinetd                   Cisco inetd services
  class-map                Class-map show commands.
  cli                      CLI display commands
  clns                     Display CLNS related information
  clock                    Display the system clock
  cmpp                     CMPP show commands(cisco-support)
  cmproxy                  Show calvados manager proxy information(cisco-support)
  cmsnoopmib               show cmsnoopmib MIB(cisco-support)
  coherent                 coherent platform related
  configuration            Contents of Non-Volatile memory
  connected                Connected Routing Information(cisco-support)
  context                  Show context information about all recent crash(s)
  controllers              Interface controller status and configuration
  cpu-memory-snapshots     Show CPU/memory usage history for the system
  cpu-snapshots            Show cpu snapshots/usage history for a process
  cpu-top-consumers        Show top CPU consumers
  crypto                   Crypto information
  dcm                      Data Collection Manager Core Details
  debug                    Show debug flags
  debug-collector          debug collector(cisco-support)
  default-afi-safi-vrf     Default AFI/SAFI/VRF setting
  dhcp                     Show Dynamic Host Configuration Protocol (DHCP) information
  diag                     Show chassis information
  diameter                 Display Global Diameter statistics
  dll                      Shared objects information
  dpa                      DPA show commands(cisco-support)
  dpt                      Dynamic Packet Transport (common)(cisco-support)
  drops-all                Display both software and hardware drops(cisco-support)
  ds                       Directory services show commands
  dsm                      dsm show commands(cisco-support)
  dsr                      Directory services replicator show comman
  dwdm                     Show dwdm related trace data(cisco-support)
  eapd                     Show EA PD DLL component(cisco-support)
  edcd                     Display data for existing EDCD entries (event/pattern)
  edmlib                   edmlib commands
  efd                      Ethernet Fault Detection show commands
  eigrp                    EIGRP show commands
  enf                      Notification infra show commands
  epm                      Show Execution Path Monitor information
  error-disable            Show Error-Disabled interface information
  ether-ea                 show commands for vEther EA PD DLL(cisco-support)
  ethermgbl                ether-mgbl traces(cisco-support)
  ethernet                 Ethernet show commands
  event                    Event information
  evpn                     EVPN Associated Configuration Info
  exception                Show all exception dump configuration
  exec                     Show operational data for exec shell(cisco-support)
  explicit-paths           Show IP explicit paths
  fault-profile            Show fault profile
  feature-mgr              Feature Manager(cisco-support)
  fhrp-output              FHRP Output show commands(cisco-support)
  fia-cfg-profile          fia-cfg-profile utiliy(cisco-support)
  fia-cfg-profile          libfia_cfg_profile_utils trace commands
  filesystem               Show List of filesystems
  fim                      fault insertion framework commands
  flow                     Netflow information
  flowspec                 FlowSpec information
  fm                       Show fault management information for XR
  fpd                      show fpd package
  fpd-serv                 Show fpd-serv information(cisco-support)
  frequency                Frequency related show commands
  fructrlmib               Show traces of frucontrolmib component(cisco-support)
  ftp                      Display ftp related information(cisco-support)
  fwd                      forwarder driver partner(cisco-support)
  g709                     Show g709 component(cisco-support)
  generic-interface-list   information about interface-lists
  gnmi                     gRPC Network Management Interface (gNMI)(cisco-support)
  gnoi                     gRPC Network Management Interface (gNOI)(cisco-support)
  gnss-receiver            GNSS receiver related show commands
  grid                     GRID show commands(cisco-support)
  grpc                     gRPC state(cisco-support)
  gsp                      GSP show commands
  health                   health info
  history                  show history of the commands executed
  hosts                    IP domain-name, lookup style, nameservers, and host table
  hsrp                     Show Hot Standby Router Protocol status
  http                     http information(cisco-support)
  hw-module                Display h/w module information
  hw-module                hw-module
  iccp                     Inter-Chassis Communication Protocol information
  icpe-internal            ICPE internal show commands(cisco-support)
  igmp                     IGMP information
  igpte-lib                MPLS IGP library(cisco-support)
  iir                      IIR Show Commands(cisco-support)
  im                       Interface Manager information
  imdr                     iMDR show commands(cisco-support)
  install                  Install Manager(cisco-support)
  interfaces               Interface status and configuration
  inventory                Show the physical inventory
  ip-lib                   IP LIB (cisco-support)
  iparm2                   Test IP ARMII(cisco-support)
  ipc                      ipc show commands
  iphc                     Show iphc info
  ipsla                    Show IPSLA information
  ipv4                     IPv4 information
  ipv6                     IPv6 information
  isis                     IS-IS routing information
  issu                     ISSU diagnostic commands
  ital                     Show data for the ITAL library(cisco-support)
  ital-shm                 Show trace data for the RSI SHM component(cisco-support)
  json-rpc                 Show commands for the JSON-RPC server(cisco-support)
  key                      Show key details
  kim                      Show commands for kernel interface module
  kim                      Show commands for kernel interface module(cisco-support)
  kmi                      Display libkmi related information
  l2rib                    Layer 2 routing information base
  l2route                  Layer 2 routing table
  l2snoop                  Show l2snoop commands
  l2tp                     Show L2TPv3 information
  l2tpv2                   Show L2TPv2 information
  l2vpn                    L2VPN information
  lacp                     Show Link Aggregation Control Protocol information
  lcc                      Label Consistency Checker
  libema                   Show traces of ema client middleware library(cisco-support)
  license                  Smart License information
  line                     TTY line information
  lisp                     Show lisp commands
  lldp                     LLDP information
  lmp                      Link Management Protocol (LMP) information
  lmrib                    Label Multicast Routing Information Base(cisco-support)
  local                    Local Routing Information(cisco-support)
  logging                  Show the contents of logging buffers
  loopback                 Loopback information(cisco-support)
  lpts                     Local Packet Transport Service information
  lrd                      Show lrd trace information(cisco-support)
  lslib                    Show command for Link-State Library(cisco-support)
  ltrace                   Show light weight trace attributes
  mac-accounting           MAC accounting statistics
  management               Show commands for the management infrastructure
  md5                      MD5 information
  mda                      MDA schema information(cisco-support)
  media                    Show media storage information
  memory                   Memory statistics
  memory-delta             Show process memory delta (i.e. memory usage has increased)
  memory-snapshots         Show memory snapshots/usage history for a process
  memory-top-consumers     Show top memory consumers
  mfib                     Multicast Forwarding Information Base
  mgmt-plane               Show Management Plane
  mhost                    mhost options
  mirror                   Show status of directories which are to be mirrored accross locations
  mlacp                    Show MC-LAG information
  mld                      MLD information
  mlib                     Multicast Forwarding library
  monitor-session          Monitor-session show commands
  mpa                      IP MPA Multicast bindings
  mpg                      Management Plane Gateway(cisco-support)
  mpls                     MPLS information
  mrib                     Multicast Routing Information Base
  msdp                     Multicast Source Discovery Protocol (MSDP)
  multilink                Multilink interface information
  mvpn                     MVPN - Multicast virtual private network
  nacm                     Show NACM information
  netconf                  NETCONF operational commands
  netconf-yang             NETCONF YANG operational commands
  netio                    Netio information(cisco-support)
  netio-debug              Netio debug information(cisco-support)
  netio-perf               Show Netio DLL performance information(cisco-support)
  nfea                     Netflow-EA show commands(cisco-support)
  nrs                      NRS information(cisco-support)
  nsr                      Show information about NSR's Infrastructure components
  nsr                      Show information about NSR's Infrastructure components(cisco-support)
  ntp                      Network time protocol
  nvgen                    Nvgen information(cisco-support)
  object-group             Object group information
  odu                      Show odu component(cisco-support)
  ofa                      OFA show commands(cisco-support)
  oor                      Out-of-Resource (OOR) information(cisco-support)
  operational              Generic show command of all the operational data
  optics                   Show optics component(cisco-support)
  optics-driver            Show Optics Driver component(cisco-support)
  orrspf                   ORR SPF
  ospf                     OSPF commands
  ospfv3                   OSPFv3 commands
  otn-sync                 Show trace data for the otn_sync component(cisco-support)
  otnsonetlib              otn sonet lib related
  otu                      Show otu component(cisco-support)
  oversubscription         Show command for oversubscription(cisco-support)
  packet-memory            Show all packet memory related information
  parser                   Parser specific information
  pbr                      Policy-based routing (PBR) information(cisco-support)
  pce                      Path Computation Server
  pcl                      Policy clientlib information(cisco-support)
  performance-measurement  Performance Measurement Information
  performance-mgmt         Display statistics collected by Performance Management subsystem
  pfilter-ea               PFILTER-EA Platform details(cisco-support)
  pfilter-ma               Show packet filtering ma module(cisco-support)
  pfilter-netio            Show packet filtering netio module(cisco-support)
  pidb                     Show pidb ltrace
  pim                      PIM - Protocol Independent Multicast
  ping                     Display ping related information
  pkgfs                    Package File System information
  placement                Placement related show commands
  platform                 Platform card type and states in all slots
  pm                       Show processmgr services
  pm-engine                Show data for pm engine(cisco-support)
  pmdbcc                   pmdbcc show commands(cisco-support)
  policy-lib               Show policy library data(cisco-support)
  policy-map               Policy-map show commands
  policymgr                Policy manager show commands(cisco-support)
  pool                Display Pool parameters
  portmapper          Port-mapper show commands(cisco-support)
  portmode            Display information about Port-mode
  pos                 Show POS information
  pos-rsm             Show POS RSM
  ppinfo              Show ppinfo distribution information
  pqmon               Show packet queue monitor(cisco-support)
  pqnodeid            Partially Qualified Nodeid test information
  prefix-compression  Show IPV6 Prefix-Compression data(cisco-support)
  prefix-list         List Prefix Lists
  processes           Process statistics
  protection-notif    Fast traffic protection information(cisco-support)
  protocols           IP routing protocols
  ptah                Physical Transport Alarm HAL Information(cisco-support)
  ptp                 Precision Time Protocol show commands
  python              Show Python SDK commands(cisco-support)
  qos                 QOS information
  qos-lib             QoS Library Tracing(cisco-support)
  qos-ma              show commands for qos_ma process(cisco-support)
  qsm                 Show QSM stats
  radius              Display Global RADIUS server statistics
  raw                 Show RAW commands
  rcc                 Route Consistency Checker
  rds                 RDS show commands(cisco-support)
  rdsfs               RDSFS show commands(cisco-support)
  reboot              Reboot information
  redundancy          redundancy status information
  redundancy-group    redundancy group information
  replica             Show Out Of Sync replica data(cisco-support)
  replicator          Show replicator services
  rib                 IP RIB
  rip                 IP RIP show commands
  route               IP routing table
  router              routing protocol status
  router-id           router id's
  rpl                 Routing policy show commands.
  rsi                 show RSI Master or distributed RSI Agent info(cisco-support)
  rsvp                RSVP information
  running-config      Current operating configuration
  sampler-map         Sampler map information
  sap                 SAP Commands
  scheduled           Show scheduled(cisco-support)
  schema-describe     Show commands for the schema-describe tool(cisco-support)
  sdr                 Shows local SDR information
  sdr-invmgr          Show sdr invmgr information
  segment-routing     Segment Routing
  serial              Serial interface information(cisco-support)
  service-layer       Service Layer information(cisco-support)
  services            Show information relating to services
  session-redundancy  Session Redundancy information
  sessions            Information about outgoing connections
  shared-memory       Show shared memory statistics(cisco-support)
  shelf-mgr-proxy     Show shelf mgr proxy debug information
  ship                Show ship component data(cisco-support)
  shmalloc            SHMALLOC show commands(cisco-support)
  shmwin              Shared memory window commands(cisco-support)
  sla                 Service-Level Agreement show commands(cisco-support)
  slc                 Standby LC VM bootup Orchestration(cisco-support)
  smiap               smiap for virtual IP address(cisco-support)
  snmp                SNMP statistics
  socket              Show info for the socket library(cisco-support)
  sonet-local         Show sonet_local component(cisco-support)
  sonet-rsm           Show SONET RSM
  spanning-tree       Spanning Tree protocol show commands
  spio                Streamlined Packet IO information(cisco-support)
  spp                 Show Software Packet Path state
  srlg                Show SRLG values for all interfaces
  ssh                 Show Secure Shell sessions
  ssl                 Show SSL statistics
  ssm                 service state manager
  static              Static Routing Information(cisco-support)
  statsd              Statistics Infrastructure show commands(cisco-support)
  svd                 show Selective VRF download information
  sysdb               SysDB show commands(cisco-support)
  syslog              Syslog related information(cisco-support)
  sysmgr-mon          Watchdog VM Monitor information
  system              Show system information.
  tacacs              Shows TACACS+ server information
  tbm                 Treebitmap(cisco-support)
  tcp                 Show TCP commands
  tech-support        Show system information for tech-support(cisco-support)
  telemetry           Telemetry show commands
  terminal            Display terminal configuration parameters
  tftp                Display tftp related information(cisco-support)
  tftpd               Display tftpd related information
  track               Show track
  traffic-collector   Traffic Collector
  tty                 TTY processing
  tunnel              Show tunnel parameters(cisco-support)
  tunnel-ip           Show IP tunnel information(cisco-support)
  type6               Display type6 information
  udp                 Show UDP commands
  user                Show id of the current logged in user
  users               Display information about terminal lines
  vaccesslib          vAccess lib information
  variables           show system variables
  version             System hardware and software status
  vether-client       libvether_client trace commands
  vether-driver       libvether_server trace commands
  vether-ea           show commands for vEther EA PD DLL(cisco-support)
  vether-giport-ea    libvether_server_giport_platform trace commands
  vether-stats        libvether_stats_fretta trace commands
  vicr                Virtual Interface Configuration Replicator information(cisco-support)
  vm-mon              Watchdog VM Monitor information
  vrf                 VRF information
  vrf-group           Show VRF names for a vrf-group
  vrrp                Show Virtual Router Redundancy Protocol Status
  vtxp-monitored      List down vtxp enabled dwdm interfaces
  wanphy              Show wanphy related trace data(cisco-support)
  watchdog            Watchdog information
  xipcq               Show XIPC queue details(cisco-support)
  xml                 XML Infrastructure / Parser information
  xos                 Cross-OS Library Information and Traces
  yfed                YFED commands
  yfw                 show YANG Framework information
  yserver             Yang Server process information
  zapdisk             show zapdisk
  ztp                 Zero Touch Provisioning module(cisco-support)

[marce1000]

       - Is show health relevant ?

 M.

[Phat Tran]

admin show environment

[william12312]

Hi there,

Thank you for reaching out to us. In IOSXR 7.1.2, the command for displaying environmental information on the NCS 5508 has indeed changed. Instead of the traditional "show environment" command, you can now use the "show environment all" command to obtain the environmental details you are looking for.

By using the "show environment all" command, you will be able to retrieve comprehensive information about the system temperature, fan status, power supply status, and other environmental parameters of your NCS 5508 device.

If you have any further questions or need additional assistance, please feel free to ask. We're here to help!

Best regards,

William

[mmmnour]

#show environment all
^
% Invalid input detected at '^' marker.
still not working on this device
Cisco IOS XR Software, Version 6.5.2
Copyright (c) 2013-2019 by Cisco Systems, Inc.