10-22-2014 02:10 PM - edited 03-05-2019 12:01 AM
Does anyone know what ios i can run on my supervisor Iv engine. I just bought it and they did not send the flash with it. I have IOS for Supervisor 720,sup32 on hand right now..
The IV engine is going in a 4500 chassis and needs to be able to support up to a 48 port sfp card as well as many others.
10-22-2014 02:59 PM
Read the Release Notes. The Release Notes will contain details of open/closed/solved bugs as well as the different line cards supported by each IOS train.
10-22-2014 03:19 PM
The Catalyst 4500 Supervisor IV uses the switch IOS SG images. The latest release for that platform is cat4500-ipbasek9-mz.150-2.SG8.bin and can be downloaded via the Cisco web site. This release will support a WS-X4248-FE-SFP 48-port SFP-based line card with no trouble. If you have the WS-X4748-SFP-E line card, you're going to need to use newer supervisor because there's no switch IOS image for the supervisor IV that supports it.
10-23-2014 07:42 AM
Thank you so much Jody, I do not have access through my account to download images through the site. The supervisor had a FE-SFP in it.. What Model would i need to run a WS-X4748-SFP-E?
10-23-2014 07:52 AM
If you set up a free account at CCO, I believe that is enough for access to download the base software images without a contract. For the WS-X4748-SFP-E you need a 4500E chassis and a supervisor 7L-E, 7-E or 8-E; and switch IOS 15.2.1E.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide