Showing results for 
Search instead for 
Did you mean: 

Need help with OER policy configuration


This is my first time configuring OER policy. I want to accomplish the following policy but couldn't find a sample config from Cisco documentations. Can someone help me out?

Router R1 is OER master. Router R2 and R3 are 2 border routers. R1 has OSPF with R2 and R3. R2 and R3 has a direct link in between but not running IGP. I have configured basic OER master and border routers. They are talking fine.

R2 and R3 also have OSPF with external nodes, not BGP.

I want to configure the following outbound policy:

a) for HTTP from user subnet to server subnet, use R2 as exit

b) for FTP from the same user subnet to the same server subnet, use R3 as exit

Thanks a lot for any help.

1 Reply 1

Joseph W. Doherty
Hall of Fame Master Hall of Fame Master
Hall of Fame Master


The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.


From what you've described, it seems just PBR might satisfy your need.

Unsure OER can do what you desire; PfR (with PIRO) might be required.  Also a good chance your link between R2 and R3 might need to be added to your OSPF topology.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers