Routing

All,I have a test lab configured in gns3 for frame-relay, and I had the following question.I configured frame relay on both router's physical interfaces, but I couldn't ping either one. I then changed the physical interface to only encapsulate frame-...

hello all,i created a lab for ebgp......... intersting thing is i can reach the bgp neighbors throuh backup path but still they can not form neighborships..........they can reach & create neighbor through primary path...... all typical setting is...

I need to do password recovery for a 2911 router. But ı can't find any documentation about it. I can be able to login at the first login, unfortunately ı logged out without changing the password. Now I can not log in and I can not open rommon with th...

Hi Guys,   I have two public IPs (two different ISPs) and i am  planning to configure redundancy between these IPs for my network. Here i  can configure HSRP or any redundany protocol but the challenge is for  the mail or webserver where the incoming...

hi guys,I have a big problem that is driving me crazy.Here my configuration:Dialer1                               Ethernet0/0 --------------> [Router 1481]<-------------------->[Firewall]<----------->[LAN MGT]Dialer1: is the ISDN interface used to op...

Hi team,We have 12K GSR at one end an 7200 router at other end. ospf configured for our remote offices with 2 links for redundancy.Primary will be of 100Mbps and secondary will be 34Mbps. But the ospf cost o the links will be showing as 1 for both th...

Hello,sorry for my english. I have one question. I have one server (web application) with IP 10.1.1.2 . It's located in the internal network. But on the router "newROUTER" is deployed NAT 10.1.1.2 to global address 83.15.52.165 (dns entry: app.exampl...

Hi,I am facing issue while configuring service-policy output command in Cisco 7609-S router with c7600s72033-adventerprisek9-mz.122-33.SRE2.bin IOS. However, in the same series router having IOS c7600s72033-adventerprisek9-mz.122-33.SRC6.bin is suppo...

Hello,I am trying to configure the failover scenario:I have 2 ISPs. The first one is ADSL connected to ADSL router and then to cisco router, which I configure. The second one has a public IP address with subnet mask /30. The problem is that when I co...

Hello all,My team already bought one 1800 Series router. And they setted some passwor.Right now i am not able to login. I know the cisco password recovery method to reset the password.Instead of password recovery method i want to try with total facto...

Hi I tried to reset a pasword on a cisco adsl 37 router.I followed the instructions posted in document:  Document ID: 12065"Password Recovery Procedure for the Cisco 806, 826, 827, 828, 831, 836, 837 and 881 Series Routers"After step 9 (Type  configu...