06-13-2023
03:03 PM
- last edited on
06-15-2023
04:31 PM
by
Translator
in the following example I configured ip addresses
ospf, dhcp
I can not ping pc to pc, pc to server. access on left whireless I could not configure. can I get help? thank you
Solved! Go to Solution.
06-14-2023 12:31 AM
Follow the advice given by David Ruess. When dealing with multiple issues, it is best to work on one problem and one specific network segment at a time. Please provide the zipped pka/pkt file and instructions that you are working with.
06-13-2023 03:32 PM
You might have to upload your .pkt file in a zip folder for someone to take a look. But a couple of questions.
Can your PC reach its DG? Put a static IP/mask on your PC and see if it can reach its DG - if not start troubleshooting there at L2
Check the routing table of the routers. Do they have all the needed routes for reachability to the servers and PC networks?
-David
06-14-2023 12:24 PM
thank you for help.
first question is how can I send .pkt file. second what is DG? I tried to post the packet tracer file but I don't know how to do it. thank you frank
06-14-2023
06:17 PM
- last edited on
06-15-2023
04:29 PM
by
Translator
Archive the pka/pkt file as a zipped file (.zip extension) and then attach it as you did the images (.jpg).
In the context that David Ruess used it, DG denotes
Default-Gateway
06-15-2023 11:47 AM
06-17-2023 02:40 AM
Hi
I uploaded the requested zip file , did it get thorough? can I get help
06-24-2023 04:51 AM
Hi I uploaded the required zip file. can I get help? thank you frank.
06-14-2023 12:31 AM
Follow the advice given by David Ruess. When dealing with multiple issues, it is best to work on one problem and one specific network segment at a time. Please provide the zipped pka/pkt file and instructions that you are working with.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide