05-25-2021 08:55 AM
Hello everyone,
and sorry for my bad english
Im trying to configure a Cisco 881G-4G Router.
Cellular is allready working.
Ping via Console works.
Router#ping google.de Translating "google.de"...domain server (10.74.210.210) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.217.20.227, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/43/56 ms Router#
Interfaces:
Router#show ip interface brief Interface IP-Address OK? Method Status Protocol Cellular0 10.148.51.xxx YES IPCP up up Cellular1 unassigned YES unset down down FastEthernet0 unassigned YES unset up up FastEthernet1 unassigned YES unset down down FastEthernet2 unassigned YES unset down down FastEthernet3 unassigned YES unset down down FastEthernet4 unassigned YES unset administratively down down NVI0 10.10.10.1 YES unset up up Vlan1 192.168.1.1 YES manual up up Router#
Ping from Vlan1 (PC) to 10.148.51.xxx works too.
But vlan1 has no Internet Connectionn.
Full config:
Current configuration : 2388 bytes ! ! Last configuration change at 15:43:01 UTC Tue May 25 2021 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ethernet lmi ce ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool vlan1pool network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 ! ! ! ip cef no ipv6 cef ! ! ! ! ! multilink bundle-name authenticated ! ! chat-script lte "" "AT!CALL" TIMEOUT 20 "OK" ! ! ! ! ! license udi pid C881G-4G-GA-K9 sn FCZ2238E2XN ! ! ! redundancy ! ! ! ! ! controller Cellular 0 lte sim data-profile 1 attach-profile 1 slot 0 no lte gps enable lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monitor-timer 20 lte modem link-recovery wait-timer 10 lte modem link-recovery debounce-count 6 ! ! ! ! ! ! ! ! ! ! ! ! interface Cellular0 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation slip dialer in-band dialer idle-timeout 0 dialer string lte dialer-group 1 ! interface Cellular1 no ip address encapsulation slip ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 no ip address ! interface FastEthernet4 no ip address shutdown duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ip route 0.0.0.0 0.0.0.0 Cellular0 ! dialer-list 1 protocol ip permit ipv6 ioam timestamp ! access-list 1 permit 192.168.1.0 ! control-plane ! ! ! mgcp behavior rsip-range tgcp-only mgcp behavior comedia-role none mgcp behavior comedia-check-media-src disable mgcp behavior comedia-sdp-force disable ! mgcp profile default ! ! ! ! ! ! ! line con 0 no modem enable line aux 0 line 2 no activation-character no exec transport preferred none transport input all stopbits 1 line 3 script dialer lte no exec rxspeed 100000000 txspeed 50000000 line 8 no exec rxspeed 100000000 txspeed 50000000 line vty 0 4 password test123 login transport input none ! scheduler allocate 20000 1000 ! end
05-25-2021 09:42 AM
Try below commands and let us know how it goes :
cnfig t
!
no access-list 1 permit 192.168.1.0
access-list 1 permit 192.168.1.0 0.0.0.255
ip nat inside source list 1 interface Cellular0 overload
!
end
test from client.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide